How To Remove Power Steering Fluid From Driveway

Power steering fluid stains are one of the most dreaded sights in the driveway. When the fluids are present on your driveway, they look ugly and give your driveway a messy feel. Nobody wants a dirty-looking driveway. By all means, people find ways to remove these unpleasant fluids stain as soon as possible. 

Fortunately, there are different ways to remove these fluids from your driveway. On this page, we discuss some tips on how to get rid of power steering fluid from your driveway.

Tips To Removing Power Steering Fluid From The Driveway

There are several ways to get those fluid stains out of your driveway. Below are do-it-yourself methods to remove the fluid. Keep in mind that you need to thoroughly clear any debris, leaves, loose dirt, and grass cuttings in the area and rinse off the stained area with a garden hose before trying any of the methods below.

Tip #1: Use kitty litter with clay pellets

Kitty litter is useful in oil spills, and when used with an absorbent material like clay pellets, it can thoroughly clean up fluid. The clay is super-absorbent and can draw fluids out of the porous driveway.

If the power steering fluid on your driveway is new or light, allow kitty litter to sit on it for some minutes. However, if the fluid covers a large area and there is an excessive wet area, let the kitty litter sit overnight. Repeat the process if there is still fluid on your driveway after the initial litter is swept. 

Tip #2 Scrub with dawn dish soap

Dawn Dish soap can work wonders for a lot of different cleaning situations outside of the kitchen. First, mix a bit of Dawn dish soap with water then spread the mixture over the affected area. Let the mixture sit for about fifteen to thirty minutes. 

Once time has passed, scrub the affected area and use water to rinse it away. Dish soap provides an emulsification process, which can mix with oil and lift it from a surface. Clean and repeatedly rinse until all the fluid is abolished. 

Tip #3: Clean fluid with laundry detergent

Using laundry detergent in combating power steering fluid is almost similar to the use of dawn dish soap. To get rid of fluid from your driveway, you must sprinkle the laundry detergent on the stained area. Let the detergent and the fluid mix and let it sit for at least one hour. 

After that, scrub off the fluid from your driveway using a stiff brush. Remove the detergent and stain by spraying it off or wiping it clean with a hose. Repeat the process if necessary. 

Tip #4: Clean fluid with baking soda

Even if the fluid has settled into your driveway, you can remove any moisture with baking soda. It is an absorbent that does an excellent work lifting moisture from wherever they’re applied. To remove fluid, use a generous amount of baking soda on the affected driveway.

Make sure the baking soda is a little wet to allow adherence of the fluid to the baking soda. Let the mixture sit for 30 minutes; after that, get a stiff brush and scrub off the fluid. Use a water hose to rinse off. Repeat the process if required until all oil stains are removed. 

Tips #5: Use a pressure washer

Move to something a little more powerful if the baking soda didn’t remove the power steering fluid from your driveway. Pressure washers are an excellent long-term investment for homeowners and are necessary for eliminating power steering fluid from the driveway.

Start your pressure washer with a low setting and gradually move up to higher pressure while continuously moving the spray around the stain. Ensure your pressure washing nozzle is away from the surface, so you get an even clean with no harsh stripes.

 Tip #6: Use commercial driveway degreaser

Anything designed to clean up grime and oil on an engine could also clean fluid on your driveway. So, if you have power steering fluid that can’t be removed using the methods above, you may need to use an industrial-strength driveway cleaner/degreaser. This type of degreaser can get the job done faster and easier.

It involves applying the degreaser on the driveway. The degreaser acts like ball bearings, and loosen up the fluid to permit easy removal. The only downside is that degreasers don’t break down the fluid so they won’t work well on a heavily contaminated driveway. 

Tip #7: Get fluid off with WD-40

WD-40 is an excellent moisture remover. You can find the product in stores, and it makes sense having WD-40 at home since it has many uses and is helpful in many home cleaning tasks. Apply this product over the entire fluid on your driveway. Let it sit for at least 30 minutes to sink into the fluid. 

The WD-40 is strong enough and should be able to pull the fluid out. If needed, scrub the stain using a hard brush and repeat it if you still have fluid on your driveway. Remember to wear protective clothing and face cover when working with WD-40 and keep small children and pets away.

Tip #8: Sawdust and paint thinner

Paint thinners are solvents used for thinning fluid stains, while sawdust is an excellent absorbent that helps to soak up the fluid. Mixing sawdust and paint thinner can give excellent results if you want to remove power steering fluid from your driveway.

Mix sawdust with paint thinner until the sawdust is damp. Spread the mixture over the affected surface for around 20 to 30 minutes. Sweep clean and check. If the stain is still on your driveway, repeat the process.

Tip #9: Cleaning fluid with a poultice

Using a poultice is another treatment for removing fluid from the driveway. A poultice consists of a cleaner and an absorbent material like sawdust or talc,  made into a thick paste. The cleaner will lift the stain, and the absorbent will soak up and clean the fluid.

Use water to soak the fluid and spread the poultice on the stain. Ensure that you cover the entire area. The solvent will break down the power steering fluid while the absorptive material will suck it out of your driveway. Once the poultice dries, use a stiff brush to scrape it off. Repeat the process if the fluid has not cleared up. However, this method takes a lot of time and may not be a cost-effective way of removing large fluid stains.

Tip #10: Baby or Talcum Powder

You can use baby or talcum powder to remove fluids from your driveway. The powder soaks up and absorbs the power steering fluid on your driveway without you touching it as you clean.

First, absorb the excess fluid using paper towels, an absorbent cloth, or a sponge. Then, sprinkle the powder on the affected surface and let it settle in. Clean the fluid when the powder soaked up the fluid by brushing the powder off. Repeat the process if the fluid has not gone away completely.

Tip #11: Use Muriatic acid

It’s time to use muriatic acid if any of the above tips don’t work. Make a chemical solution of muriatic acid with water. After mixing the acid solution, pour the solution over the affected area and work it using a stiff-bristle broom or nylon scrub brush. Clean the entire area with water after the solution has settled.

Remember, working with muriatic acid is dangerous. Put on rubber gloves to protect your arms and hands, wear eye protection, and ensure plenty of ventilation. Do not attempt this project when pets or children are present.

Tip #12: Use Coca Cola

While people drink Coca Cola, there are other uses for the beverage that you may have never considered. This method is not excellent for deep, old, and large stains. However, if the fluid stain is small and has just occurred, Coca-Cola can be a saver.

You can take a can or two of Coca-Cola and pour it over the stain. Allow the Coca Cola to sit for some minutes, and then rinse it with water and the stain should be gone. The result should be quite pleasing.

Tip #13: Oven cleaner 

Oven cleaner can be used to remove fluid stains from your driveway. Simply spray the oven cleaner over the fluid stain until it is fully saturated and allow the oven cleaner to soak in for at least 15 minutes.

Take a hard steel brush or hard-bristled brush and scrub at the fluid stain. As you scrub, you will see the fluid stain start to disappear. Scrub until you no longer see a spot. Rinse off the area with water at high pressure. You can repeat the process if the fluid still reappears.

Reason To Clean Your Driveway

You should consider cleaning your driveway from power steering fluid if you want to extend the lifespan of your surface and to prevent further damage. Take a look at other reasons why you should clean your driveway when you have a fluid stain:

  • A clean driveway makes an excellent first impression.
  • A clean driveway minimizes pollution to local waterways.
  • A clean driveway helps deter rodents and other pests.
  • You can have your driveway looking good.
  • A clean driveway discourages littering.

In Conclusion

These are tips on how to remove power steering fluid from your driveway. However, it’s always best to clean fluid stains as soon as possible. The longer the fluid is left on your driveway, the more it will become saturated, causing the driveway to deteriorate quickly. The methods above have a good reputation as a commercial or a home remedy for removing power steering fluid from your driveway. We hope you enjoyed the information in this article. 

Want more stories like this? Check out the related reads below:

Leave a Comment: