Can You Put Too Much Iron In Your Lawn? (And How Can I Make My Grass Green Fast?)

Yes! Iron in high concentrations is poisonous to moss and weeds, killing them without toxic chemicals. However, be cautious when applying–getting a higher concentration of iron on your lawn will hurt it as well. If you apply too much iron, the grass will turn orange, but it will regenerate.

Ironite contains ferrous sulfate, which will burn grass if added while the lawn is damp or the temperature is over 80 degrees. Too much boron can be poisonous to grass, allowing it to discolor and mature poorly and burn the tips of the blades.

What does adding iron to your lawn do?

If you’ve ever wondered how your neighbor maintains such a lush green lawn, the answer may be iron. Iron supplements, a favorite secret weapon of lawn care professionals and golf courses, help impart a lush, deep, blue-green color to lawn grasses.

For optimal growth and reproduction, lawn grasses, like all plants, need an ample supply of various vital nutrients. Also, in otherwise fertile soil, a single nutrient deficiency can cause a wide range of problems. Iron is a necessary micronutrient, which ensures that your lawn needs it for proper growth but only consumes a limited amount of it. Ironite provides iron in a shape that plants readily absorb.

Iron is especially adequate with fescue and bluegrass, allowing these grasses to remain deep green during the hot summer months without the increased growth (and subsequent water requirements) caused by nitrogen fertilizers. Iron also aids in moss control and is an active ingredient in products such as Moss Out.

How much iron can I put on my lawn?

If chlorosis shows a severe iron deficiency, an average lawn needs around 0.7 ounces of iron per 1,000 square feet. Take note not to exceed 1.4 ounces per 1,000 square feet since this amount can cause black-green discoloration in lawn grasses, which can be troublesome. Ironite is a mineral that contains 4.5 percent iron by weight. To supply 0.7 ounces of iron, add approximately 1 pound of Ironite per 1,000 square feet; do not apply more than 2 pounds per 1,000 square feet.

To get the most out of your Iron application, a near-neutral pH will help provide the desired results as with any other material. Make sure you irrigated the day before or started with moist soil. When applied to a stressed plant, iron can do more damage than good and should never be used as a masking agent. Iron may be a fantastic weapon to have in the shed, but it must be handled with care; otherwise, you can learn the hard way! Applying iron in the heat of the day would almost certainly result in burns, and going off the label will only cause your lawn to blacken. Since iron is added as a foliar spray to the leaf, it is easier for the plant to consume.

How long does iron last on the lawn?

So, how long does a piece of string usually last? The explanation for this is that every property is unique. Some lawns will react quickly and hang on, while others will take longer to green up and lose it. Remember, iron is a replacement, not a magical potion that can turn your lawn into the 18th hole at Augusta National. The application of iron on a lawn is most effective when used in combination with a well-structured curriculum.

How do I know if my lawn needs iron?

Grasses, in general, are vulnerable to a conflict of interest in the spring. While rising air temperatures and longer days encourage rapid development, the cold soil of spring suppresses the biological and chemical activity that makes nutrients accessible to plants. This effect is particularly noticeable in lawns that early-season applications of soluble nitrogen have enhanced. Since the amount of available iron in your soil may not be sufficient for the high nutritional needs associated with exuberant spring rise, now is an excellent time to add Ironite. In soil with a high pH, supplemental iron, including soluble forms like Ironite, may become fixed into inaccessible forms. Use the liquid type of Ironite if the soil is alkaline so that the grass can consume more iron from its leaves.

While most soils contain enormous amounts of iron compared to the quantities required by plants, most of this iron is bound up in ways that roots cannot absorb. Also, soil pH has a significant impact on iron supply. When the pH increases above 6.5, iron become scarce, and most cases of iron deficiency cases are caused by high pH rather than a lack of iron in the soil. Ironite and other soluble iron fertilizers address this issue by including iron in a way that plants can use.

Tips for Getting Your grass green fast?


Mow the lawn regularly. This could mean every three or four days during the season. Set your mowing blade just to cut off one-third of the grass height; chopping off more than that reveals brown areas at the grass’s base and can ruin patches of your lawn. Mowing a few inches off the top of your lawn for a few days will make it thicken to appear like a strong sheet of grass.

Water the grass thoroughly and infrequently

Turning on your sprinkler for a couple of minutes a few days a week won’t make much of a difference to your lawn. Learn to water your lawn deeply and less often for a cleaner lawn. The roots of your grass will begin to expand deeper into the soil if you water infrequently and thoroughly. During droughts or cycles of intense heat, this lets the grass remains green. Once a week, spray the lawn with 1 inch of water, according to experts. This amount, of course, varies based on the temperature, soil quality, grass types, and other factors in your region.

Air your lawn

Simply put, lawn aeration entails poking holes in the lawn around 3 inches long. Regular lawn aeration will assist in providing your grass with a proper growing environment, including loose soil and improved air circulation. Your lawn can now use water and fertilizer more efficiently. Microorganisms can also cultivate themselves in your soil, assisting in the breakdown of any thatch accumulated. You can aerate your lawn in various ways, including renting a big aerating machine or using a small handheld aerating unit. A portable aerating tool would suffice for most homeowners with small to medium-sized lawns. You can aerate your lawn annually.

Boost your soil with Mycorrhizal Root Builder

Mycorrhizal fungi are helpful soil microbes that supply the garden plants and grass with a secondary root system. They cling to the roots of plants and grass, assisting them in making better water and organic nutrients in the soil.  You can improve the efficiency of mycorrhizal fungi by using a mycorrhizal fungi root builder. Mycor Root Builder is a fantastic tool that will benefit all of your plants, not just your turfgrass.

Since adding a nitrogen-rich fertilizer to your grass, make sure to water it. Nitrogen provides the grass a substantial growth boost, causing it to develop faster and turn a darker color. Don’t use this trick every month because too much nitrogen can harm your grass, but one or two treatments can have a nearly immediate greening impact during the growing season. To keep the grass green, you will need to spray and mow it more often as it grows faster.

Grass clippings should be “grass-cycled.”

Grasscycling is the practice of allowing grass clippings from mowing to be reused on your lawn. The beauty of grass-cycling is that it is easy! Instead of tossing out your grass clippings, you leave them on the ground. Grass clippings have been shown to decompose rapidly and return required nutrients to the soil. The grass clippings often serve as a natural mulch, which helps the grass retain moisture. Grass-cycling is a great way to boost your lawn while still saving you time in the process! Other advantages of grasscycling include better soil texture, less pesticide use, less time spent mowing, and less waste sent to the landfill.

Although most lawnmowers can be converted for grass-cycling, a reel mower is your best choice. Reel mowers are quiet, effective, and simple to use, and they leave the grass where it belongs: on your lawn! If you can’t bear the sight of grass clippings in your yard, composting them is another choice. Purchase a simple compost bin and use it to fertilize your lawn and garden.


Both plants and humans need iron. In humans, the mineral is found in hemoglobin, which transports oxygen to the brain, lungs, and internal organs via red blood cells. Iron is required for the production of chlorophyll in plants, among other things. Chlorophyll is accountable for the green color of the leaves, but it is also used to manipulate sunlight to produce sugars. In a nutshell, it’s the process by which plants feed themselves. Plants also use iron to make enzymes and hormones that regulate daily activities within their cells.

Leave a Comment: