Can You Make Your Own Clay Bar Lubricant

You must be wondering what a clay bar lubricant is? It is a beneficial tool to have around the house. No need to worry about all that dust and residue anymore. In this article, we will explain what you can do with a clay bar lubricant. Another question most people have is if they can make their very own clay bar lubricant. Learn how to make your own clay bar lubricant and clean any messes.

What is a Clay Bar Lubricant?

All clays require a lubricant. That is the only way that a clay lubricant is going to work. A Clay bar lubricant is as lubricant and cleaner that is designed to remove dust and residue from paint finishes. They remove overspray and paint contamination in a haste leaving surfaces smooth to the touch. Clay bar lubricants have become very important tools for auto detailing.

What can I use a Clay Lubricant Bar on?

Use a clay bar lubricant on any surface that has any particles on it. It best not to avoid particles. It’s recommended to polish the paint off any surface after in order to maintain the best finish. Using a clay lubricant bar is the only way to really get the job done to remove all contaminated particles on the surfaces of paint. In all actuality, the clay bar itself never touches the paint. 

Clay bars have an abrasive side. It recommended not to use a clay bar on car surfaces because it will only leave unpleasant scratch marks. The only way to know that clay bars don’t work is if they leave damage to the pain. Be prepared for the paint to be removed with clay bars remove and particles. 

What Should I Not Use a Clay Bar Lubricant On?

You cannot use a clay bar lubricant on swirl marks or to remove scratches. Instead, use a more abrasive polish to get rid of these scratches. 

Benefits of Using a Clar Bar Lubricant

There are actually a lot of key benefits when it comes to using clay. Clay bars clean any surface in the speed of light. And it does not physically wear on the paint finish. The most noticeable benefit of a clay bar lubricant is how smooth it is. Your car is going to feel so slick and smooth just minutes after you use the clay. 

Not only does using clay bar lubricants make for fast finishes and smooth surfaces, but the wax is taken off easier than ever before. For a better resolution, get a contamination-free finish that allows for the wax to stay on longer. Nevertheless, it will always look better.

Life Expectancy of a Clay Bar

18 months to 2 years time. You can use it as many times to touch up paint. 

Where Should I Store the Clay Bar?

Save the clay bar in its initial case if possible, or keep it in an airtight plastic bag. Spray it with the clay lubricant to keep it wet. Do not leave the clay to freeze and do not stock it in temperatures above 200° F.

How Do I Clean Surface Areas with Clay Bar Lubricant?

Cleaning surfaces with your very own clay bar lubricant is very easy. The Clay works well on any surface including glass and chrome. You should always remove claying with a wax. Only clay can remove existing wax. Just follow these steps in the cleaning process. Follow the instructions very carefully because if there is any mess-up and there is no turning back.

  • Step 1: Wash and dry your vehicle for head to toe. Make sure you get the bottom surfaces well. The lubricant will never work if there is any remaining dirt on the surface. Work in a shaded area in direct sunlight.
  • Step 2: Spray a small area of the car with pinnacle clay lubricant. Don’t spray an area any bigger than 2 square feet.
  • Step 3: Rub the clay bar back and forth (NOT in circles) around the wet area. Clay the whole vehicle. The clay with grab at any contaminated particles out of the paint. Once you notice that is gliding freely in the paint, then it is clean
  • Step 4: Wipe the area dry with a microfiber towel. Then use the clay bar lubricant to get rid of any clay residue that was left behind.
  • Step 5: Rub your finger across the glass to see if the job was done well. If nothing has changed, then you should repeat the process.

Trashing a Contaminated Clay Bar Lubricant

Immediately following dropping a clay bar lubricant on the ground, you should never use it. Once it falls on the ground all sorts of contaminated grits are sealed on its surface. Another piece of advice is not to overuse your detailing clay. It best to wash the lubricant following claying your car to remove any lubricant film. Lastly, seal your freshly cleaned paint by using clay with any choice of wax or sealant.

How to Make Your Own Clay Bar Lubricant

To answer your question, yes you can keep your very own clay bar lubricant. Users need to take safety precautions when handling their own clay bar lubricant. It is important to have all the needed supplies to keep your car clean. Instead of going out to the store, here are instructions on how to make a clay bar lubricant. 

Clay bar lubricant is any easy DIY project. For any items that you may not have in your garage, for example rubbing alcohol, it is sold in any drug store or supermarket. It is highly recommended to test the clay bar lubricant that you have made before you use it on any surface. Clay bar lubricants are known to cause unsightly scratch marks if not handled right. 

  • Step 1: Add 4 oz of rubbing alcohol to a cleaner 1-quart spray bottle
  • Step 2: Fill up the rest of the bottle with distilled water
  • Step 3: Add three to five drops (And that’s it!) of liquid dishwashing detergent
  • Step 4: You have your very own clay bar lubricant

What is the Best Clay Lube?

We are glad that you asked because we have an answer. Here are some of the best clay lubricants to use available on amazon for a great deal.

  1. Mothers California Gold Clay Bar System (On Amazon)
  2. Chemical Guys Clay Bar & Lubricant Kit (On Amazon)
  3. Towel Motors 2-Pack Detailing Clay (On Amazon)
  4. Meguiar’s Smooth Surface Clay Kit (On Amazon)
  5. YGDZ 2 Piece Car Clay Bar (On Amazon)
  6. IPELY 4 Pack Car Clay Bars (On Amazon)
  7. 8 LEOBRO 4 Pack Car Clay (On Amazon)

Leave a Comment: